FA-93HWS ν Gundam Heavy Weapons System Type | RX-93 ν Gundam Double Fin Funnel Type | RX-93-ν2 Hi-ν Gundam To the main body, let's assemble the funnel binder, which is also the identity of Nightingale. This is the exterior and base parts. Fit the base part into the exterior part. Connection joint with the main body. Thanks to this part, the binder can move flexibly. The holding power is perfect. We will attach the vernier to the base part. It is a masterpiece that all the yellow parts are color-coded by the vernier internal parts. The funnel base parts are set on the surface. This is also a fine detail. This is the funnel. It is a one-part configuration. Of course it is removable. If you attach the funnel, the funnel binder is completed. Now, the parts other than the armament are finally completed. A little after. Nightingale can mount onto Action Bases 1 or 4, though it requires an extra arm unit from an additional copy to support its weight. RGM-86R GM III | RGM-88X Jeddah | RGM-89 Jegan | RGZ-91 Re-GZ | RX-93 ν Gundam | RX-93-ν2 Hi-ν Gundam This product a highly detailed plastic model kit which self assembly is required. No glue or paint necessary. Official product visuals shown are provided by the officials which may be painted and clear coated. Final product may be slightly different upon completion.

Most of the red exterior is under-gated as shown in the photo, so the gate marks are not noticeable. I attached the exterior of the knee and the front sneaker. The armor of the front sneak can be flipped up. Sneak exterior. There are three engines inside. The Legs joint axis of the ankle has a large diameter, so the strength is outstanding. The sealing part has a seam in the center as shown by the red line in the photo. This is one of the few parts that needs to be erased. If you attach the base parts of the rose-apple, the leg frame part is completed. Nightingale's landing gear can be interchanged into two different specifications depending on your preference. Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.

Variants [ ] Reissues of the Gunpla from mid-2022 onward will feature an additional Bandai Namco logo. Notes & Trivia [ ] The included Beam Rifle also serves as an add-on for the builders that intend to complete the Ballistic Zaku ( HGGTO MS-06S Zaku II/ HGGTO MS-06S Zaku II (Red Comet Ver.)/ HGUC MS-06S Zaku II Commander Type Char Aznable Custom (2020) + HGBC Ballistic Weapons) model kit build, though the rifle is much larger than the one seen in the ONA. This is Bandai's highly detailed plastic model kit which self assembly is required. No glue or paint necessary. Official product visuals shown are provided by Official Bandai which may be painted and clear coated. Final product may be slightly different upon completion. For better results, most or some of the details are needed to be applied/panel-lined with Gundam Markers and/or Mr. Color paints. Gundam #Gunpla #โมเดล #โมเดลกันดั้ม #โมเดลกันพลา #กันดั้มกันพลา #โมเดลgundam #โมเดลgunpla #gundamโมเดล #gunplaโมเดล #vcagundam #vca

The MA class giant is reproduced in detail on 1/144 scale. Left and right width about 400 mm, total height about 211 mm. AMS-119 Geara Doga Heavy Armed Type | AMS-119S Geara Doga Kai | AMS-120X Geara Doga Psycommu System Test Type Let's start with the contents of the box. The instruction manual is also extensive with setting explanations. The Runner is a multi-color molded A runner. The new effect parts are beautiful. B runner. The shield and crotch parts are conspicuous. C runner. It is a runner for the exterior of the legs. D runner with outstanding presence. Five Funnels were equipped on each of the movable binders, resulting in a total of ten funnels. They were resized Funnels from the NZ-333 α Azieru, and had high operability due to the adoption of a large-capacity condenser system [2].. The crotch part is completed when combined. By the way, the crotch part can move up and down a little. I tried to match the parts assembled so far. Thanks to the movable claws, the ankles touch the ground comfortably.Depending on where you live, the time it may take for your exchanged product to reach you, may vary. NOTE :หากสั่งสินค้าพร้อมส่งกับสินค้าพรีออเดอร์ในบิลเดียวกันจะรอจัดส่งพร้อมกันเมื่อสินค้าพรีออเดอร์มาครบแล้วนะคะ In case the product, there may be cases, under certain situations, where the delivery date is changed or delayed ,we, VCAGUNDAM.com cannot take responsible for any loss or detriment involved in the use of the service.

Most of the products shown are beingcolored manually, there may be some uneven colorings. Color and form of the product may differ from the actual product and what is seen on screen depending on monitor settings. Some product imagesshown may be in development stage. They may differ from the actual products. Each part of the base of the funnel binder is movable, and the binder can be unfolded and folded. The funnel can be removed individually.

Skill Level 1:

Barder, Ollie (2018-11-05). Yutaka Izubuchi On Designing The Most Popular Gundam Ever And His Love Of Kaiju. A large firearm with a total length of approximately 30 meters that could emit beams as powerful as Mega Bazooka Launchers. It was able to separately fire focused and diffused beams—resembling scattershot rounds see in shotguns— and could be fired rapidly. The weapon could also be used in Launcher Mode by unfolding its bipod and connecting it to an external energy source [2]. PLEASE TAKE NOTE THAT THE PICTURES DESCRIPTION BELOW ARE FOR REFERENCE ONLY. IT MAY BE DIFFERENT FROM THE ACTUAL PRODUCT. The assembly of the arm is very simple parts division. The base parts of the wrist are also nicely detailed. There are 6 types of hand parts: left and right fists, left and right saber handles, right gun grip, and left flat hand. The movable range is also very excellent. The movable range is a little narrower than usual, but you can also bend it so-called. Not counting the B-Club kit, this Gunpla is the second plastic model iteration of the Nightingale unit, following the RE/100 kit.