LTP Grimex - Heavy Duty Cleaner, Grease and Grime Remover 1 Litre

Product Information

I should have sought advice on day one ~ GRIMEX world like magic but doing a whole floor in one go has me beat. I do a section at a time and the results are fantastic. If you’re wondering how to clean porcelain paving before grouting, we recommend using LTP Grimex. Simply dilute one-part LTP Grimex in ten parts warm water and apply it liberally over the entire surface of the slabs using a soft brush. For stubborn marks, use a stiff brush. After 5-10 minutes, rinse off thoroughly with clean water. It may be tempting to use 10mm porcelain tiles for your external paving project, either because you like a particular design or colour, or the tiles are a lot lighter and easier to handle than purposeful 20mm outdoor porcelain paving. However, we recommend against using 10mm tiles for your external paving project. Intensive cleaner, effective for removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural stone and tiles. Ideal for general stone care and for use in the restoration of artificial and natural tiles and floors. It is especially effective on stone, travertine, slate, terracotta, porcelain and quarry tiles. LTP Grimex helps remove stubborn stains and existing layers of sealant from floors and tiles. It is also suitbale for the general maintenance cleaning of external driveways, patios and paths.

LTP Grimex - Heavy Duty Cleaner, Grease and Grime Remover 1

LTP Grimex is an intensive cleaner, effective for removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural stone and tiles. Ideal for general stone care and for use in the restoration of artificial and natural tiles and floors.

Test the product on an inconspicuous surface, initially, before applying the residue remover to your porcelain paving, working in manageable areas at a time. Leave the solution to penetrate the surface. Leave for 1-5 hours depending on the level of soiling. To remove cement and grout stains you may find LTP Grout Stain Remover is a more effective alternative.

Grim HEX - Star Citizen Wiki

Spread out evenly using a roller, sealer applicator, paintbrush or sprayer. Allow to dry for 30 minutes. Apply a second coat and leave to cure for a minimum of 1 hour before grouting. After moving in to our new to us house the large extent of large yellowish tiles never looked clean. Jointing compound is made from different ingredients to cement or sand base trowel-in grouts, so removing residues requires a specific solution. LTP Solvex is a high-performance, non-caustic remover designed to soften polymers, making residue easy to remove. To restore your paving, use the following process:Important: Test the solution on an inconspicuous area before general application. Any alkalinity remaining on surfaces treated with this product should be completely neutralised. This may be done with a little clean water applied by sponge. Should you wish to spring clean your porcelain patio to combat leaves and debris have marked the surface, using a heavy-duty grime remover will remove stubborn stains.